Port Forwarding the Encore ENHWI-N2 Router for Vivotek PZ61x2


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Encore ENHWI-N2 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Encore > ENHWI-N2 > Vivotek PZ61x2

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Encore ENHWI-N2 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Encore ENHWI-N2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Encore ENHWI-N2 Router IP Address

It's ok if you don't know your Encore ENHWI-N2 router's internal IP address. You can find it by doing one of the following:

Login To The Encore ENHWI-N2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Encore ENHWI-N2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Encore ENHWI-N2 router. By default the IP address should be set to 192.168.1.1.

Encore ENHWI-N2 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Encore ENHWI-N2 Router Username is: admin

The Default Encore ENHWI-N2 Router Password is: admin


Click the Log In button to log in to your Encore ENHWI-N2 router.


Default Usernames and Passwords for other Encore Routers

Please visit our Default Encore Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Encore ENHWI-N2 router username and password, use our How to Reset a Router Password guide to set your Encore ENHWI-N2 router back to its factory settings.


How to Port Forward Vivotek PZ61x2 on the Encore ENHWI-N2


Having trouble forwarding ports on the Encore ENHWI-N2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Encore ENHWI-N2 router to save you time and hassle.

Encore ENHWI-N2 Router Port Forwarding Screenshots

Now that you are logged in to your Encore ENHWI-N2 router you should see the following:

Encore ENHWI-N2 Screenshot 2

Click the Access Control link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

Encore ENHWI-N2 Screenshot 3

Forward Ports 80 on the Encore ENHWI-N2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Vivotek PZ61x2 requires you to forward the 80,5002-5003 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.

Enabled : Enabled Disabled
Name :
Protocol :
Private Port :
Public Port :
LAN Server :

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Vivotek PZ61x2 on the Encore ENHWI-N2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Encore ENHWI-N2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Encore ENHWI-N2 Router Screenshots. We have the Internets largest collection of Router Screenshots.