Login To The Encore ENHWI-N2 Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Encore ENHWI-N2 router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
The Default Encore ENHWI-N2 Router Username is: admin
The Default Encore ENHWI-N2 Router Password is: admin
Click the Log In button to log in to your Encore ENHWI-N2 router.
Default Usernames and Passwords for other Encore Routers
If you can't login to your router because you forgot your Encore ENHWI-N2 router username and password, use our
How to Reset a Router Password guide to set your
Encore ENHWI-N2 router back to its factory settings.
How to Port Forward WatchBot on the Encore ENHWI-N2
Having trouble forwarding ports on the Encore ENHWI-N2?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your Encore ENHWI-N2 router to save you time and hassle.
Encore ENHWI-N2 Router Port Forwarding Screenshots
Now that you are logged in to your Encore ENHWI-N2 router you should see the following:
Click the Access Control link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
And that is it! You are done!
Test if Your Ports are Open
Now that you have forwarded ports for WatchBot on the Encore ENHWI-N2 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.