Port Forwarding the Encore ENRTR-104 Router for Breach


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Encore Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Encore > ENRTR-104 > Breach

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Encore ENRTR-104 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.1. <-- Don't Skip This Step!

Login to the Encore ENRTR-104 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Encore ENRTR-104 Router IP Address

It's ok if you don't know your Encore ENRTR-104 router's internal IP address. You can find it by doing one of the following:

Login To The Encore ENRTR-104 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Encore ENRTR-104 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Encore ENRTR-104 router. By default the IP address should be set to 192.168.1.1.

Encore ENRTR-104 Screenshot 1

You should see a box prompting you for your Encore ENRTR-104 password. Enter the password now.

The Default Encore ENRTR-104 Router Password is: blank


Click the Login button to log in to your Encore ENRTR-104 router.


Default Usernames and Passwords for other Encore Routers

Please visit our Default Encore Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Encore ENRTR-104 router password, use our How to Reset a Router Password guide to set your Encore ENRTR-104 router back to its factory settings.


How to Port Forward Breach on the Encore ENRTR-104


Having trouble forwarding ports on the Encore ENRTR-104?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Encore ENRTR-104 router to save you time and hassle.

Encore ENRTR-104 Router Port Forwarding Screenshots

Now that you are logged in to your Encore ENRTR-104 router you should see the following:

Encore ENRTR-104 Screenshot 2

Click the Advanced Setup link near the center of the page.

Encore ENRTR-104 Screenshot 3

Click the NAT link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

Encore ENRTR-104 Screenshot 4

Forward Ports 4380,8766,27000-27050 on the Encore ENRTR-104

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Breach requires you to forward the following ports: 4380,8766,27000-27050. Go ahead and enter the settings shown above into the Virtual Server menu.

  Mapping Ports Server IP Enabled
1. 192.168.1.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for Breach on the Encore ENRTR-104 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Encore ENRTR-104 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Encore Router Screenshots. We have the Internets largest collection of Router Screenshots.