Port Forwarding the Encore WTC215 Router for Spliter Cell Double Agent


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Encore Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Encore > WTC215 > Spliter Cell Double Agent

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Encore WTC215 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Encore WTC215 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Encore WTC215 Router IP Address

It's ok if you don't know your Encore WTC215 router's internal IP address. You can find it by doing one of the following:

Login To The Encore WTC215 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Encore WTC215 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Encore WTC215 router. By default the IP address should be set to 192.168.1.1.

Encore WTC215 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward Spliter Cell Double Agent on the Encore WTC215


Having trouble forwarding ports on the Encore WTC215?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Encore WTC215 router to save you time and hassle.

Encore WTC215 Router Port Forwarding Screenshots

Now that you are logged in to your Encore WTC215 router you should see the following:

Encore WTC215 Screenshot 2

Click the Advanced Setup link near the top of the page.

You should now see a new menu. In this new menu, click NAT.

Encore WTC215 Screenshot 3

Click the Virtual Server link near the bottom of the page.

Encore WTC215 Screenshot 4

Forward Ports 3074 on the Encore WTC215

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Spliter Cell Double Agent requires you to forward the 3074,8888-8889 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

Rule Index :
Start Port Number :
End Port Number :
Local IP Address :


Forward Ports 8888-8889 on the Encore WTC215

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Save.

Rule Index :
Start Port Number :
End Port Number :
Local IP Address :

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Spliter Cell Double Agent on the Encore WTC215 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Encore WTC215 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Encore Router Screenshots. We have the Internets largest collection of Router Screenshots.