Port Forwarding the Ericsson W20e Router for Command and Conquer 3 Kanes Wrath


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Ericsson Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Ericsson > W20e > Command and Conquer 3 Kanes Wrath

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Ericsson W20e router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Ericsson W20e Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Ericsson W20e Router IP Address

It's ok if you don't know your Ericsson W20e router's internal IP address. You can find it by doing one of the following:

Login To The Ericsson W20e Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Ericsson W20e Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ericsson W20e router. By default the IP address should be set to 192.168.1.1.

Ericsson W20e Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Ericsson W20e Router Username is: user

The Default Ericsson W20e Router Password is: user


Click the Log In button to log in to your Ericsson W20e router.


Default Usernames and Passwords for other Ericsson Routers

Please visit our Default Ericsson Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Ericsson W20e router username and password, use our How to Reset a Router Password guide to set your Ericsson W20e router back to its factory settings.


How to Port Forward Command and Conquer 3 Kanes Wrath on the Ericsson W20e


Having trouble forwarding ports on the Ericsson W20e?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Ericsson W20e router to save you time and hassle.

Ericsson W20e Router Port Forwarding Screenshots

Now that you are logged in to your Ericsson W20e router you should see the following:

Ericsson W20e Screenshot 2

Click the NAT button near the left of the page.

Ericsson W20e Screenshot 3

Click the Add Instance link near the bottom of the page.

Ericsson W20e Screenshot 4

Forward Ports 8088 on the Ericsson W20e

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Command and Conquer 3 Kanes Wrath requires you to forward the 8088-65535 ports. Go ahead and enter the settings shown above into the Add Portforwarding Instance menu and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8089 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8090 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8091 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8092 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8093 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8094 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8095 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8096 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8097 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8098 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8099 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8100 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8101 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8102 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8103 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8104 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8105 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8106 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8107 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8108 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8109 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8110 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8111 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8112 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8113 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8114 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8115 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8116 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:


Forward Ports 8117 on the Ericsson W20e

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Portforwarding Instance page. Go ahead and enter those settings and then click Apply.

Protocol:
NAT Port:
Server IP:
Server Port:

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Command and Conquer 3 Kanes Wrath on the Ericsson W20e you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Ericsson W20e Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Ericsson Router Screenshots. We have the Internets largest collection of Router Screenshots.