Port Forwarding the Etec PT-8411G Router for QSee QC444-426-2

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Etec > PT-8411G > QSee QC444-426-2

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Etec PT-8411G router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Etec PT-8411G Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Etec PT-8411G Router IP Address

It's ok if you don't know your Etec PT-8411G router's internal IP address. You can find it by doing one of the following:

Login To The Etec PT-8411G Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Etec PT-8411G Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Etec PT-8411G router. By default the IP address should be set to

Etec PT-8411G Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Etec PT-8411G Router Username is: admin

The Default Etec PT-8411G Router Password is: admin

Click the Ok button to log in to your Etec PT-8411G router.

Default Usernames and Passwords for other Etec Routers

Please visit our Default Etec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Etec PT-8411G router username and password, use our How to Reset a Router Password guide to set your Etec PT-8411G router back to its factory settings.

How to Port Forward QSee QC444-426-2 on the Etec PT-8411G

Having trouble forwarding ports on the Etec PT-8411G?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Etec PT-8411G Router Port Forwarding Screenshots

Now that you are logged in to your Etec PT-8411G router you should see the following:

Etec PT-8411G Screenshot 2

Click the Advance link near the top of the page.

Etec PT-8411G Screenshot 3

Click the Firewall link near the top of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Etec PT-8411G Screenshot 4

Forward Ports 80,37777 on the Etec PT-8411G

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QC444-426-2 requires you to forward the 80,37777 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

IP Address:
TCP Port:
UDP Port:

When you're finished, click Save near the top of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QC444-426-2 on the Etec PT-8411G you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Etec PT-8411G Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.