Port Forwarding the FRITZ WLAN3030 Router for SWAT 4-The Stetchkov Syndicate


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View FRITZ Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > FRITZ > WLAN3030 > SWAT 4-The Stetchkov Syndicate

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the FRITZ WLAN3030 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the FRITZ WLAN3030 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your FRITZ WLAN3030 Router IP Address

It's ok if you don't know your FRITZ WLAN3030 router's internal IP address. You can find it by doing one of the following:

Login To The FRITZ WLAN3030 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

FRITZ WLAN3030 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your FRITZ WLAN3030 router. By default the IP address should be set to 192.168.178.1.

FRITZ WLAN3030 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward SWAT 4-The Stetchkov Syndicate on the FRITZ WLAN3030


Having trouble forwarding ports on the FRITZ WLAN3030?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your FRITZ WLAN3030 router to save you time and hassle.

FRITZ WLAN3030 Router Port Forwarding Screenshots

Now that you are logged in to your FRITZ WLAN3030 router you should see the following:

FRITZ WLAN3030 Screenshot 2

Click the Internet link near the left of the page.

FRITZ WLAN3030 Screenshot 3

You should now see a new menu. In this new menu, click Portfreigabe.

FRITZ WLAN3030 Screenshot 4

Click the Neue Portfreigabe button near the right of the page.

FRITZ WLAN3030 Screenshot 5

Select Andere Anwendungen from the Portfreigabe aktiv fur drop down box.

FRITZ WLAN3030 Screenshot 6

Forward Ports 10480-10483 on the FRITZ WLAN3030

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. SWAT 4-The Stetchkov Syndicate requires you to forward the 10480-10483 ports. Go ahead and enter the settings shown above into the Portfreigabe menu and then click Ubernehmen.

Portfreigabe aktiv fur
  Bezeichnung
  Protokoll
  von Port bis Port
  an IP-Adresse
  an Port bis Port

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for SWAT 4-The Stetchkov Syndicate on the FRITZ WLAN3030 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

FRITZ WLAN3030 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our FRITZ Router Screenshots. We have the Internets largest collection of Router Screenshots.