Port Forwarding the FRITZ WLAN3050 Router for CanVision

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View FRITZ Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > FRITZ > WLAN3050 > CanVision

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the FRITZ WLAN3050 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the FRITZ WLAN3050 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your FRITZ WLAN3050 Router IP Address

It's ok if you don't know your FRITZ WLAN3050 router's internal IP address. You can find it by doing one of the following:

Login To The FRITZ WLAN3050 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

FRITZ WLAN3050 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your FRITZ WLAN3050 router. By default the IP address should be set to

FRITZ WLAN3050 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default FRITZ WLAN3050 Router Username is: admin

The Default FRITZ WLAN3050 Router Password is: admin

Click the Ok button to log in to your FRITZ WLAN3050 router.

Default Usernames and Passwords for other FRITZ Routers

Please visit our Default FRITZ Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your FRITZ WLAN3050 router username and password, use our How to Reset a Router Password guide to set your FRITZ WLAN3050 router back to its factory settings.

How to Port Forward CanVision on the FRITZ WLAN3050

Having trouble forwarding ports on the FRITZ WLAN3050?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

This guide will work for the following CanVision products.

IP-100 (Video and audio)
IP-300 (video only ip network camera)
IP-301 (Video and audio)
IP-200 (video and audio server box)
PT-300 (Pan Tilt video and audio gpio, WiFi, POE, ip network camera)
IP-560 (video and audio plus gpio plus changable lens)

MPEG4 format
IP-220 (video and audio , gpio, RS485 control video server box)
IP-580 (video and audio , gpio plus changable lens)
PT-380 (Pan Tilt video and audio , gpio, WiFi, POE, plus changable lens)

TVS-120 (IP television brocasting system)

The default port used by these cameras is TCP Port 80. You can change this port if you want to. To do so open up the O'RITE utility.

The HTTP Port1 box contains the port that should needs to be forwarded. Enter the port you chose in the following box. If you did not change port that your camera is using, just enter 80 into the following box.

O'Rite's HTTP Port1

FRITZ WLAN3050 Router Port Forwarding Screenshots

Now that you are logged in to your FRITZ WLAN3050 router you should see the following:

FRITZ WLAN3050 Screenshot 2

Click the Internet link near the left of the page.

You should now see a new menu. In this new menu, click Portfreigabe.

FRITZ WLAN3050 Screenshot 3

Click the Neue Portfreigabe button near the right of the page.

FRITZ WLAN3050 Screenshot 4

Select Andere Anwendungen from the Portfreigabe aktiv fur drop down box.

FRITZ WLAN3050 Screenshot 5

Forward User Defined Port on the FRITZ WLAN3050

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. CanVision requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Portfreigabe menu and then click Ubernehmen.

Portfreigabe aktiv fur
  von Port bis Port
  an IP-Adresse
  an Port bis Port

Forward User Defined Port on the FRITZ WLAN3050

You should see another page of settings that need to be entered into one of the blank lines on your routers Portfreigabe page. Go ahead and enter those settings and then click Ubernehmen.

Portfreigabe aktiv fur
  von Port bis Port
  an IP-Adresse
  an Port bis Port

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for CanVision on the FRITZ WLAN3050 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

FRITZ WLAN3050 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our FRITZ Router Screenshots. We have the Internets largest collection of Router Screenshots.