Port Forwarding AIM Talk on the FRITZ WLAN7050

What is Port Forwarding?

View all Router Screenshots.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.178.1.

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

You can find common passwords that might work for your router in our Default Router Passwords page.

Click the Internet link near the left of the page.

You should now see a new menu. In this new menu, click Portfreigabe.

Click the Neue Portfreigabe button near the right of the page.

Select Andere Anwendungen from the Portfreigabe aktiv fur drop down box.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. AIM Talk requires you to forward the 5190 ports. Go ahead and enter the settings shown above into the Portfreigabe menu and then click Ubernehmen.

And that is it! You are done!

To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.