Port Forwarding the Fiberline IR3440 Router for QSee QSTD DVRs


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Fiberline > IR3440 > QSee QSTD DVRs

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Fiberline IR3440 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.0. <-- Don't Skip This Step!

Login to the Fiberline IR3440 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Fiberline IR3440 Router IP Address

It's ok if you don't know your Fiberline IR3440 router's internal IP address. You can find it by doing one of the following:

Login To The Fiberline IR3440 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Fiberline IR3440 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Fiberline IR3440 router. By default the IP address should be set to 192.168.0.1.

Fiberline IR3440 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Fiberline IR3440 Router Username is: admin

The Default Fiberline IR3440 Router Password is: admin


Click the Ok button to log in to your Fiberline IR3440 router.


Default Usernames and Passwords for other Fiberline Routers

Please visit our Default Fiberline Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Fiberline IR3440 router username and password, use our How to Reset a Router Password guide to set your Fiberline IR3440 router back to its factory settings.


How to Port Forward QSee QSTD DVRs on the Fiberline IR3440


Having trouble forwarding ports on the Fiberline IR3440?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Fiberline IR3440 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.


Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.


Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.



Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Fiberline IR3440 Router Port Forwarding Screenshots

Now that you are logged in to your Fiberline IR3440 router you should see the following:

Fiberline IR3440 Screenshot 2

Click the Advanced link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Servers.

Fiberline IR3440 Screenshot 3

Forward Ports 80 on the Fiberline IR3440

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSTD DVRs requires you to forward the following ports: 80,2000. Go ahead and enter the settings shown above into the Virtual Servers menu.

Service PortServer IP in LANPort in LANProtocol
192.168.8.


Forward Ports 2000 on the Fiberline IR3440

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Servers page. Go ahead and enter those settings now.

Service PortServer IP in LANPort in LANProtocol
192.168.8.

When you're finished, click Save & Restart near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSTD DVRs on the Fiberline IR3440 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Fiberline IR3440 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.