Port Forwarding the Fujitsu Siemens AP-600RP-USB Router for QSee QSD2308L


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Fujitsu Siemens > AP-600RP-USB > QSee QSD2308L

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Fujitsu Siemens AP-600RP-USB router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Fujitsu Siemens AP-600RP-USB Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Fujitsu Siemens AP-600RP-USB Router IP Address

It's ok if you don't know your Fujitsu Siemens AP-600RP-USB router's internal IP address. You can find it by doing one of the following:

Login To The Fujitsu Siemens AP-600RP-USB Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Fujitsu Siemens AP-600RP-USB Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Fujitsu Siemens AP-600RP-USB router. By default the IP address should be set to 192.168.1.254.

Fujitsu Siemens AP-600RP-USB Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Fujitsu Siemens AP-600RP-USB Router Username is: blank

The Default Fujitsu Siemens AP-600RP-USB Router Password is: connect


Click the Ok button to log in to your Fujitsu Siemens AP-600RP-USB router.


Default Usernames and Passwords for other Fujitsu Siemens Routers

Please visit our Default Fujitsu Siemens Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Fujitsu Siemens AP-600RP-USB router username and password, use our How to Reset a Router Password guide to set your Fujitsu Siemens AP-600RP-USB router back to its factory settings.


How to Port Forward QSee QSD2308L on the Fujitsu Siemens AP-600RP-USB


Having trouble forwarding ports on the Fujitsu Siemens AP-600RP-USB?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Fujitsu Siemens AP-600RP-USB router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.


Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.


Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.



Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Fujitsu Siemens AP-600RP-USB Router Port Forwarding Screenshots

Now that you are logged in to your Fujitsu Siemens AP-600RP-USB router you should see the following:

Fujitsu Siemens AP-600RP-USB Screenshot 2

Click the Advanced Setting link near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

Fujitsu Siemens AP-600RP-USB Screenshot 3

Click the Add button.

Fujitsu Siemens AP-600RP-USB Screenshot 4

Forward Ports 80,2000 on the Fujitsu Siemens AP-600RP-USB

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD2308L requires you to forward the 80,2000 ports. Go ahead and enter the settings shown above into the Add Port Forwarding Rule menu and then click Ok.

Add Port Forwarding Rule
Incoming Port
Protocol TCP
UDP
ALL
Destination IP
Destination Port


And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD2308L on the Fujitsu Siemens AP-600RP-USB you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Fujitsu Siemens AP-600RP-USB Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.