To setup port forwarding on the Fujitsu Siemens AP-600RP-USB router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Fujitsu Siemens AP-600RP-USB router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Fujitsu Siemens AP-600RP-USB router. By default the IP address should be set to 192.168.1.254.
Click the Ok button to log in to your Fujitsu Siemens AP-600RP-USB router.
Please visit our Default Fujitsu Siemens Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Fujitsu Siemens AP-600RP-USB router username and password, use our How to Reset a Router Password guide to set your Fujitsu Siemens AP-600RP-USB router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Fujitsu Siemens AP-600RP-USB router to save you time and hassle.
Now that you are logged in to your Fujitsu Siemens AP-600RP-USB router you should see the following:
Click the Advanced Setting link near the top of the page.
The menu on the left should change. In this new menu, click Virtual Server.
Click the Add button.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Stronghold Crusader requires you to forward the 2300-2400,47624 ports. Go ahead and enter the settings shown above into the Add Port Forwarding Rule menu and then click Ok.
|Add Port Forwarding Rule|
And that is it! You are done!
Now that you have forwarded ports for Stronghold Crusader on the Fujitsu Siemens AP-600RP-USB you should test to see if your ports are forwarded correctly.