To setup port forwarding on the GeekADSL Q31 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your GeekADSL Q31 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your GeekADSL Q31 router. By default the IP address should be set to 10.0.0.2.
Click the Ok button to log in to your GeekADSL Q31 router.
Please visit our Default GeekADSL Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your GeekADSL Q31 router username and password, use our How to Reset a Router Password guide to set your GeekADSL Q31 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your GeekADSL Q31 router to save you time and hassle.
Now that you are logged in to your GeekADSL Q31 router you should see the following:
Click the Gelismis Kurulum button near the top of the page.
Click the Port Yonlendirme button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Defender SN300-4CH-001 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Port Yonlendirme menu and then click Ekle.
|NO||Disari Baslangic Portu||Disari Bitis Portu||Yerel Port||Port Tipi||Alici IP numarasi|
And that is it! You are done!
Now that you have forwarded ports for Defender SN300-4CH-001 on the GeekADSL Q31 you should test to see if your ports are forwarded correctly.