Port Forwarding the Gezz AS900UR-SP4 Router for QSee QSD2216

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Gezz > AS900UR-SP4 > QSee QSD2216

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Gezz AS900UR-SP4 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Gezz AS900UR-SP4 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Gezz AS900UR-SP4 Router IP Address

It's ok if you don't know your Gezz AS900UR-SP4 router's internal IP address. You can find it by doing one of the following:

Login To The Gezz AS900UR-SP4 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Gezz AS900UR-SP4 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Gezz AS900UR-SP4 router. By default the IP address should be set to

Gezz AS900UR-SP4 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Gezz AS900UR-SP4 Router Username is: admin

The Default Gezz AS900UR-SP4 Router Password is: epicrouter

Click the Ok button to log in to your Gezz AS900UR-SP4 router.

Default Usernames and Passwords for other Gezz Routers

Please visit our Default Gezz Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Gezz AS900UR-SP4 router username and password, use our How to Reset a Router Password guide to set your Gezz AS900UR-SP4 router back to its factory settings.

How to Port Forward QSee QSD2216 on the Gezz AS900UR-SP4

Having trouble forwarding ports on the Gezz AS900UR-SP4?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Use your remote control to enter your DVR's System Setup menu.

Select the Network option from the System Setup menu.

Write down the number that is in the IP ADDR, Gateway, and Sub Net sections. Change the IP Mode to STATIC IP. Do not change the Gateway and Sub Net settings. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is The 111 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 111. So the new octet in this example would be 161, and the ip address in this example would be Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

Gezz AS900UR-SP4 Router Port Forwarding Screenshots

Now that you are logged in to your Gezz AS900UR-SP4 router you should see the following:

Gezz AS900UR-SP4 Screenshot 2

Click the Virtual Server link near the left of the page.

Gezz AS900UR-SP4 Screenshot 3

Forward Ports 80 on the Gezz AS900UR-SP4

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD2216 requires you to forward the 80,5000-5001 ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Add This Setting.

ID  Public Port - Start  Public Port - End  Private Port  Port Type  Host IP Address   

Forward Ports 5000-5001 on the Gezz AS900UR-SP4

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server Configuration page. Go ahead and enter those settings and then click Add This Setting.

ID  Public Port - Start  Public Port - End  Private Port  Port Type  Host IP Address   

When you're finished, click Save Settings / Reboot near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD2216 on the Gezz AS900UR-SP4 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Gezz AS900UR-SP4 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.