Free Help Setting up Your Router or Firewall Set up your router from home
Router List Port List Port Checker Other Guides Game Guides Store Support Forum
see list of routers and firewalls below

Default Port Forwarding on the Gigabyte GN-BR01G


What is Port Forwarding?
What is Port Triggering?


To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.254.




You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.

Please visit our default username and passsword page, if the username and password shown above did not work for you.




Click the Virtual Server link near the left of the page.

You should now see a new menu. In this new menu, click PPPoE/DHCP/Static.




Use the Protocol drop down box to select the protocol type of the ports you are forwarding. Enter the ports to forward into the Port box. These ports can be entered as a list 23,24,25, a range 500-600, or a combination of both 23,45,500-600. Enter the ip address to forward these ports to into the Virtual Server IP box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Select enable from the Enable drop down box.

When you're finished, click Submit near the bottom of the screen to save your changes.

And that's it! You're done!



To test if your port has been properly forwarded, you can use our Port Checker tool.