To setup port forwarding on the Gnet IP0006 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Gnet IP0006 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Gnet IP0006 router. By default the IP address should be set to 192.168.123.254.
You should see a box prompting you for your Gnet IP0006 password. Enter the password now.
Click the Log in button to log in to your Gnet IP0006 router.
Please visit our Default Gnet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Gnet IP0006 router password, use our How to Reset a Router Password guide to set your Gnet IP0006 router back to its factory settings.
Now that you are logged in to your Gnet IP0006 router you should see the following:
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. OKWin requires you to forward the following ports: 1729-1735. Go ahead and enter the settings shown above into the Virtual Server menu.
|ID||Service Ports||Server IP||Enable|
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for OKWin on the Gnet IP0006 you should test to see if your ports are forwarded correctly.