Port Forwarding the Gnet IP104 Router for QSee QT426


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Gnet > IP104 > QSee QT426

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Gnet IP104 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.123. <-- Don't Skip This Step!

Login to the Gnet IP104 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Gnet IP104 Router IP Address

It's ok if you don't know your Gnet IP104 router's internal IP address. You can find it by doing one of the following:

Login To The Gnet IP104 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Gnet IP104 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Gnet IP104 router. By default the IP address should be set to 192.168.123.254.

Gnet IP104 Screenshot 1

You should see a box prompting you for your Gnet IP104 password. Enter the password now.

The Default Gnet IP104 Router Password is: admin


Click the Log in button to log in to your Gnet IP104 router.


Default Usernames and Passwords for other Gnet Routers

Please visit our Default Gnet Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Gnet IP104 router password, use our How to Reset a Router Password guide to set your Gnet IP104 router back to its factory settings.


How to Port Forward QSee QT426 on the Gnet IP104


Having trouble forwarding ports on the Gnet IP104?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Gnet IP104 router to save you time and hassle.

  • Go to the Network Menu.
  • Put a check into the Obtain an IP Address Automatically box.
  • Click the Test button.
  • Look near the lower left corner. If it says Ok, then click on Apply, then Exit.


  • Go to Menu - Information and Network
  • Write down the IP Address, Subnet Mask and Gateway.


  • Go back to the Network Menu.
  • Uncheck the Obtain an IP Address Automatically box.
  • Now enter the IP Address, Gateway and Subnet Mask you wrote down earlier.
  • When you're done click Apply, then Exit.

Gnet IP104 Router Port Forwarding Screenshots

Now that you are logged in to your Gnet IP104 router you should see the following:

Gnet IP104 Screenshot 2

Click the Virtual Server link near the left of the page.

Gnet IP104 Screenshot 3

Forward Ports 80 on the Gnet IP104

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QT426 requires you to forward the following ports: 80,6036. Go ahead and enter the settings shown above into the Virtual Server menu.

ID Service Ports Server IP Enable
1 192.168.123.


Forward Ports 6036 on the Gnet IP104

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.

ID Service Ports Server IP Enable
2 192.168.123.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QT426 on the Gnet IP104 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Gnet IP104 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.