Port Forwarding the Gravis Plus e3000xdsl Router for Shiva VPN

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Gravis Plus > e3000xdsl > Shiva VPN

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Gravis Plus e3000xdsl router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Gravis Plus e3000xdsl Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Gravis Plus e3000xdsl Router IP Address

It's ok if you don't know your Gravis Plus e3000xdsl router's internal IP address. You can find it by doing one of the following:

Login To The Gravis Plus e3000xdsl Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Gravis Plus e3000xdsl Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Gravis Plus e3000xdsl router. By default the IP address should be set to

Gravis Plus e3000xdsl Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Gravis Plus e3000xdsl Router Username is: blank

The Default Gravis Plus e3000xdsl Router Password is: blank

Click the Ok button to log in to your Gravis Plus e3000xdsl router.

Default Usernames and Passwords for other Gravis Plus Routers

Please visit our Default Gravis Plus Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Gravis Plus e3000xdsl router username and password, use our How to Reset a Router Password guide to set your Gravis Plus e3000xdsl router back to its factory settings.

How to Port Forward Shiva VPN on the Gravis Plus e3000xdsl

Having trouble forwarding ports on the Gravis Plus e3000xdsl?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Gravis Plus e3000xdsl Router Port Forwarding Screenshots

Now that you are logged in to your Gravis Plus e3000xdsl router you should see the following:

Gravis Plus e3000xdsl Screenshot 2

Click the NAT link near the left of the page.

You should now see a new menu. In this new menu, click Virtueller Server.

Gravis Plus e3000xdsl Screenshot 3

Forward Ports 2233 on the Gravis Plus e3000xdsl

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Shiva VPN requires you to forward the following ports: 2233. Go ahead and enter the settings shown above into the Virtueller Server menu.

  Mapping Ports Server IP Aktiv
1. 192.168.1.

When you're finished, click Bestatigen near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Shiva VPN on the Gravis Plus e3000xdsl you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Gravis Plus e3000xdsl Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.