To setup port forwarding on the Hawking HW2R1 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Hawking HW2R1 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Hawking HW2R1 router. By default the IP address should be set to 192.168.5.200.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your Hawking HW2R1 router you should see the following:
Click the General Setup link near the top of the page.
Click the NAT link near the left of the page.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. NTP requires you to forward the following ports: 123. Go ahead and enter the settings shown above into the Virtual Server or Port Forwarding menu.
|Enable Virtual Server|
|Private IP||Computer Name||Private Port||Type||Public Port||Comment|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for NTP on the Hawking HW2R1 you should test to see if your ports are forwarded correctly.