Port Forwarding NetX RP32-WIFI Thermostat on the Hawking HW2R1

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Hawking > HW2R1 > NetX RP32-WIFI Thermostat

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

HW2R1

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.5.200.

HW2R1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

You can find common passwords that might work for your router in our Default Router Passwords page.

HW2R1

Click the General Setup link near the top of the page.

HW2R1

Click the NAT link near the left of the page.

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.

HW2R1



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. NetX RP32-WIFI Thermostat requires you to forward the following ports: 81-89,10001-10019. Go ahead and enter the settings shown above into the Virtual Server or Port Forwarding menu.

Enable Port Forwarding
Private IP Computer Name Type Port Range Comment
-




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server or Port Forwarding page. Go ahead and enter those settings now.

Enable Port Forwarding
Private IP Computer Name Type Port Range Comment
-

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.