Port Forwarding the Hewlett Packard hn200e Router for Truon 8888

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

[an error occurred while processing this directive]
Home > Routers > Hewlett Packard > hn200e > Truon 8888

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Hewlett Packard hn200e router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Hewlett Packard hn200e Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Hewlett Packard hn200e Router IP Address

It's ok if you don't know your Hewlett Packard hn200e router's internal IP address. You can find it by doing one of the following:

Login To The Hewlett Packard hn200e Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Hewlett Packard hn200e Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Hewlett Packard hn200e router. By default the IP address should be set to

Hewlett Packard hn200e Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Hewlett Packard hn200e Router Username is: admin

The Default Hewlett Packard hn200e Router Password is: admin

Click the Ok button to log in to your Hewlett Packard hn200e router.

Default Usernames and Passwords for other Hewlett Packard Routers

Please visit our Default Hewlett Packard Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Hewlett Packard hn200e router username and password, use our How to Reset a Router Password guide to set your Hewlett Packard hn200e router back to its factory settings.

How to Port Forward Truon 8888 on the Hewlett Packard hn200e

Having trouble forwarding ports on the Hewlett Packard hn200e?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Hewlett Packard hn200e Router Port Forwarding Screenshots

Now that you are logged in to your Hewlett Packard hn200e router you should see the following:

Hewlett Packard hn200e Screenshot 2

Click the Advanced button near the top of the page.

The menu near the top should change. In this new menu, click Forwarding.

Hewlett Packard hn200e Screenshot 3

Forward Ports 80 on the Hewlett Packard hn200e

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Truon 8888 requires you to forward the following ports: 80. Go ahead and enter the settings shown above into the Forwarding menu.

Service Port Range Protocol IP Address
~ 192.168.1.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Truon 8888 on the Hewlett Packard hn200e you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Hewlett Packard hn200e Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.