Port Forwarding the Huawei SmartAX-MT880v3 Router for BitTornado

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Huawei Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Huawei > SmartAX-MT880v3 > BitTornado

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Huawei SmartAX-MT880v3 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Huawei SmartAX-MT880v3 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Huawei SmartAX-MT880v3 Router IP Address

It's ok if you don't know your Huawei SmartAX-MT880v3 router's internal IP address. You can find it by doing one of the following:

Login To The Huawei SmartAX-MT880v3 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Huawei SmartAX-MT880v3 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Huawei SmartAX-MT880v3 router. By default the IP address should be set to

Huawei SmartAX-MT880v3 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Huawei SmartAX-MT880v3 Router Username is: admin

The Default Huawei SmartAX-MT880v3 Router Password is: admin

Click the Ok button to log in to your Huawei SmartAX-MT880v3 router.

Default Usernames and Passwords for other Huawei Routers

Please visit our Default Huawei Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Huawei SmartAX-MT880v3 router username and password, use our How to Reset a Router Password guide to set your Huawei SmartAX-MT880v3 router back to its factory settings.

How to Port Forward BitTornado on the Huawei SmartAX-MT880v3

Having trouble forwarding ports on the Huawei SmartAX-MT880v3?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Since you are reading this guide, I'm going to assume that you have Bit Tornado installed. Open up Bit Tornado.

Close to the top you will see a Prefs link. Go ahead and click that link now.

The Port Range box defines the ports that Bit Tornado will use. These are the ports that you need to forward to your computer. Bit Tornado does not need the full 50,000 ports that come predefined. Go ahead and uncheck the Random checkbox. Enter 10000 into the From box, and enter 10010 into the To box. If you expect to download more than 10 files at the same time, then you should make this range of ports larger.

On this page there is a UPNP Port Forwarding drop down box. Open it up and set that box to disabled. We are not going to use UPNP to forward our ports. Now go find your router on our routers page, and forward the port range you set above.

Huawei SmartAX-MT880v3 Router Port Forwarding Screenshots

Now that you are logged in to your Huawei SmartAX-MT880v3 router you should see the following:

Huawei SmartAX-MT880v3 Screenshot 2

Click the NAT link near the left of the page.

Huawei SmartAX-MT880v3 Screenshot 3

Click the Port Mapping Set button near the center of the page.

Huawei SmartAX-MT880v3 Screenshot 4

Forward Ports 10000-10010 on the Huawei SmartAX-MT880v3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BitTornado requires you to forward the following ports: 10000-10010. Go ahead and enter the settings shown above into the NAT - Edit SUA/NAT Server Set menu.

  Start Port No. End Port No. IP Address

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for BitTornado on the Huawei SmartAX-MT880v3 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Huawei SmartAX-MT880v3 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Huawei Router Screenshots. We have the Internets largest collection of Router Screenshots.