Port Forwarding the Huawei SmartAX-MT882 Router for QSee QSDR04RTC-320

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Huawei Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Huawei > SmartAX-MT882 > QSee QSDR04RTC-320

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Huawei SmartAX-MT882 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here: <-- Don't Skip This Step!

Login to the Huawei SmartAX-MT882 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Huawei SmartAX-MT882 Router IP Address

It's ok if you don't know your Huawei SmartAX-MT882 router's internal IP address. You can find it by doing one of the following:

Login To The Huawei SmartAX-MT882 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Huawei SmartAX-MT882 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Huawei SmartAX-MT882 router. By default the IP address should be set to

Huawei SmartAX-MT882 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Huawei SmartAX-MT882 Router Username is: admin

The Default Huawei SmartAX-MT882 Router Password is: admin

Click the Ok button to log in to your Huawei SmartAX-MT882 router.

Default Usernames and Passwords for other Huawei Routers

Please visit our Default Huawei Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Huawei SmartAX-MT882 router username and password, use our How to Reset a Router Password guide to set your Huawei SmartAX-MT882 router back to its factory settings.

How to Port Forward QSee QSDR04RTC-320 on the Huawei SmartAX-MT882

Having trouble forwarding ports on the Huawei SmartAX-MT882?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Huawei SmartAX-MT882 Router Port Forwarding Screenshots

Now that you are logged in to your Huawei SmartAX-MT882 router you should see the following:

Huawei SmartAX-MT882 Screenshot 2

Click the Advanced link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

Huawei SmartAX-MT882 Screenshot 3

Forward Ports 80 on the Huawei SmartAX-MT882

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR04RTC-320 requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Apply.

Status EnabledDisabled
Private IP . . .
Protocol Type
Private Port
Public Port
Schedule Always

Forward Ports 9000 on the Huawei SmartAX-MT882

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Apply.

Status EnabledDisabled
Private IP . . .
Protocol Type
Private Port
Public Port
Schedule Always

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR04RTC-320 on the Huawei SmartAX-MT882 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Huawei SmartAX-MT882 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Huawei Router Screenshots. We have the Internets largest collection of Router Screenshots.