Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
Port Forwarding Active Worlds File Transfer on the Huawei SmartAX-MT882v2
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.
Or you can take alook at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
By default both the username and password are admin. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Click the Basic link near the left of the page.
Click the NAT link.
Put a dot into the Redirect radio button.
Click the New button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Active Worlds File Transfer requires you to forward the 3000 ports. Go ahead and enter the settings shown above into the NAT menu and then click Submit.
| Protocol: | TCPUDP |
| Local Address: | . . . |
| Global Address From: | . . . |
| Global Address To: | . . . |
| Destination Port From: | |
| Destination Port To: | |
| Local Port: |
Click the Tools link near the left of the page.
Click the Save & Reboot link.
Put a dot into the Save radio button.
Click the Submit button near the bottom of the page.
Put a dot into the Reboot radio button.
Click the Submit button near the bottom of the page.
And that is it! You are done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.