To setup port forwarding on the Infomark IMW-C600W router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Infomark IMW-C600W router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Infomark IMW-C600W router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Infomark IMW-C600W router to save you time and hassle.
Now that you are logged in to your Infomark IMW-C600W router you should see the following:
Click the LAN link near the top of the page.
You should now see a new menu. In this new menu, click NAT Setting.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. CnCNet requires you to forward the ports. Go ahead and enter the settings shown above into the NAT Setting menu and then click Add.
|Enabled||Host IP||Service Port|
And that is it! You are done!
Now that you have forwarded ports for CnCNet on the Infomark IMW-C600W you should test to see if your ports are forwarded correctly.