If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Innomedia MTA3328-2R router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Innomedia MTA3328-2R router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Innomedia MTA3328-2R router. By default the IP address should be set to 192.168.99.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Innomedia MTA3328-2R router.
Please visit our Default Innomedia Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Innomedia MTA3328-2R router username and password, use our How to Reset a Router Password guide to set your Innomedia MTA3328-2R router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Innomedia MTA3328-2R router to save you time and hassle.
Now that you are logged in to your Innomedia MTA3328-2R router you should see the following:
Click the Router Settings link near the left of the page.
You should now see a new menu. In this new menu, click NAT PortMap.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Realflight G3 requires you to forward the following ports: 2300. Go ahead and enter the settings shown above into the Configure NAT PortMap Database menu.
|Delete||External Source Port||Protocol||Internal Source IP||Internal Source Port||Application|
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Realflight G3 on the Innomedia MTA3328-2R you should test to see if your ports are forwarded correctly.