To setup port forwarding on the Jensen Scandinavia Airlink-59300 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Jensen Scandinavia Airlink-59300 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Jensen Scandinavia Airlink-59300 router. By default the IP address should be set to 192.168.0.1.
Click the Ok button to log in to your Jensen Scandinavia Airlink-59300 router.
Please visit our Default Jensen Scandinavia Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Jensen Scandinavia Airlink-59300 router username and password, use our How to Reset a Router Password guide to set your Jensen Scandinavia Airlink-59300 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Jensen Scandinavia Airlink-59300 router to save you time and hassle.
Now that you are logged in to your Jensen Scandinavia Airlink-59300 router you should see the following:
Click the Advanced Settings button near the left of the page.
Click the NAT link near the left of the page.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Starwars Battle Front requires you to forward the 3658-3659,6500 ports. Go ahead and enter the settings shown above into the Port Forwarding or Virtual Server menu and then click Add.
|Enable Port Forwarding|
|Private IP||Computer Name||Type||Port Range||Comment|
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding or Virtual Server page. Go ahead and enter those settings and then click Add.
|Enable Virtual Server|
|Private IP||Computer Name||Private Port||Application Name||Type||Public Port||Comment|
And that is it! You are done!
Now that you have forwarded ports for Starwars Battle Front on the Jensen Scandinavia Airlink-59300 you should test to see if your ports are forwarded correctly.