To setup port forwarding on the Justec JDR840 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Justec JDR840 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Justec JDR840 router. By default the IP address should be set to 192.168.0.138.
Click the Ok button to log in to your Justec JDR840 router.
Please visit our Default Justec Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Justec JDR840 router username and password, use our How to Reset a Router Password guide to set your Justec JDR840 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Justec JDR840 router to save you time and hassle.
Now that you are logged in to your Justec JDR840 router you should see the following:
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Soldier of Fortune 2 requires you to forward the 20100-20112 ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Add This Setting.
|ID||Public Port - Start||Public Port - End||Private Port||Port Type||Host IP Address|
When you're finished, click Save Settings / Reboot near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Soldier of Fortune 2 on the Justec JDR840 you should test to see if your ports are forwarded correctly.