To setup port forwarding on the Kozumi KM-400P router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Kozumi KM-400P router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Kozumi KM-400P router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Kozumi KM-400P router.
Please visit our Default Kozumi Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Kozumi KM-400P router username and password, use our How to Reset a Router Password guide to set your Kozumi KM-400P router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Kozumi KM-400P router to save you time and hassle.
Before we can forward ports for Ares, we need to figure out what ports ares is using. Here is a brief walkthrough on how to do that.
Open up Ares. Then click the Control Panel icon in the toolbar at the top of your screen.
You should see a bunch of tabs close to the top of this window. One of these tabs should be labeled Transfer. Go ahead and click it now.
Enter the port you want Ares to use into the Accept incoming connections on port box. By default this port is set to 1157. You can change it to whatever you like, or leave it set to 1157.
Please enter the port you chose for Ares below.
Now that you are logged in to your Kozumi KM-400P router you should see the following:
Click the Advance button near the top of the page.
Click the Firewall button near the top of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Ares requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.
And that is it! You are done!
Now that you have forwarded ports for Ares on the Kozumi KM-400P you should test to see if your ports are forwarded correctly.