Port Forwarding the Kraun KR-1Wv2 Router for Qsee QSD2316C16-320

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Kraun Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Kraun > KR-1Wv2 > Qsee QSD2316C16-320

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Kraun KR-1Wv2 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Kraun KR-1Wv2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Kraun KR-1Wv2 Router IP Address

It's ok if you don't know your Kraun KR-1Wv2 router's internal IP address. You can find it by doing one of the following:

Login To The Kraun KR-1Wv2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Kraun KR-1Wv2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Kraun KR-1Wv2 router. By default the IP address should be set to

Kraun KR-1Wv2 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Kraun KR-1Wv2 Router Username is: admin

The Default Kraun KR-1Wv2 Router Password is: admin

Click the Ok button to log in to your Kraun KR-1Wv2 router.

Default Usernames and Passwords for other Kraun Routers

Please visit our Default Kraun Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Kraun KR-1Wv2 router username and password, use our How to Reset a Router Password guide to set your Kraun KR-1Wv2 router back to its factory settings.

How to Port Forward Qsee QSD2316C16-320 on the Kraun KR-1Wv2

Having trouble forwarding ports on the Kraun KR-1Wv2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Kraun KR-1Wv2 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.

Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.

Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.

Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Kraun KR-1Wv2 Router Port Forwarding Screenshots

Now that you are logged in to your Kraun KR-1Wv2 router you should see the following:

Kraun KR-1Wv2 Screenshot 2

Click the Advanced Setup link near the top of the page.

Kraun KR-1Wv2 Screenshot 3

Click the NAT link near the top of the page.

Kraun KR-1Wv2 Screenshot 4

Click the Virtual Server link near the bottom of the page.

Kraun KR-1Wv2 Screenshot 5

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSD2316C16-320 requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Save.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Qsee QSD2316C16-320 on the Kraun KR-1Wv2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Kraun KR-1Wv2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Kraun Router Screenshots. We have the Internets largest collection of Router Screenshots.