To setup port forwarding on the LG LAM400 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your LG LAM400 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your LG LAM400 router. By default the IP address should be set to 10.0.0.2.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your LG LAM400 router.
Please visit our Default LG Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your LG LAM400 router username and password, use our How to Reset a Router Password guide to set your LG LAM400 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your LG LAM400 router to save you time and hassle.
Now that you are logged in to your LG LAM400 router you should see the following:
Click the Advance link near the left of the page.
You should now see a new menu. In this new menu, click Specific Feature.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Quick n Easy FTP Server requires you to forward the 21 ports. Go ahead and enter the settings shown above into the Virtual Server Configruation menu and then click Add.
|ID||Public Port - |
|Public Port - |
|Private Port||Port |
|Host IP Address|
And that is it! You are done!
Now that you have forwarded ports for Quick n Easy FTP Server on the LG LAM400 you should test to see if your ports are forwarded correctly.