Port Forwarding the Level One WBR-3403TX Router for CanVision

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Level One > WBR-3403TX > CanVision

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Level One WBR-3403TX router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.123. <-- Don't Skip This Step!

Login to the Level One WBR-3403TX Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Level One WBR-3403TX Router IP Address

It's ok if you don't know your Level One WBR-3403TX router's internal IP address. You can find it by doing one of the following:

Login To The Level One WBR-3403TX Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Level One WBR-3403TX Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Level One WBR-3403TX router. By default the IP address should be set to

Level One WBR-3403TX Screenshot 1

You should see a box prompting you for your Level One WBR-3403TX password. Enter the password now.

The Default Level One WBR-3403TX Router Password is: admin

Click the Login button to log in to your Level One WBR-3403TX router.

Default Usernames and Passwords for other Level One Routers

Please visit our Default Level One Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Level One WBR-3403TX router password, use our How to Reset a Router Password guide to set your Level One WBR-3403TX router back to its factory settings.

How to Port Forward CanVision on the Level One WBR-3403TX

Having trouble forwarding ports on the Level One WBR-3403TX?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

This guide will work for the following CanVision products.

IP-100 (Video and audio)
IP-300 (video only ip network camera)
IP-301 (Video and audio)
IP-200 (video and audio server box)
PT-300 (Pan Tilt video and audio gpio, WiFi, POE, ip network camera)
IP-560 (video and audio plus gpio plus changable lens)

MPEG4 format
IP-220 (video and audio , gpio, RS485 control video server box)
IP-580 (video and audio , gpio plus changable lens)
PT-380 (Pan Tilt video and audio , gpio, WiFi, POE, plus changable lens)

TVS-120 (IP television brocasting system)

The default port used by these cameras is TCP Port 80. You can change this port if you want to. To do so open up the O'RITE utility.

The HTTP Port1 box contains the port that should needs to be forwarded. Enter the port you chose in the following box. If you did not change port that your camera is using, just enter 80 into the following box.

O'Rite's HTTP Port1

Level One WBR-3403TX Router Port Forwarding Screenshots

Now that you are logged in to your Level One WBR-3403TX router you should see the following:

Level One WBR-3403TX Screenshot 2

Click the Forwarding Rules link near the top of the page.

Level One WBR-3403TX Screenshot 3

Click the Virtual Server link near the left of the page.

Level One WBR-3403TX Screenshot 4

Forward User Defined Port on the Level One WBR-3403TX

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. CanVision requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu.

ID Service Ports Server IP Enable Use Rule#
1 192.168.123.

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for CanVision on the Level One WBR-3403TX you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Level One WBR-3403TX Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.