To setup port forwarding on the Lingo Primus-iAN-02ex router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Lingo Primus-iAN-02ex router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Lingo Primus-iAN-02ex router. By default the IP address should be set to 192.168.62.1.
Click the Ok button to log in to your Lingo Primus-iAN-02ex router.
Please visit our Default Lingo Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Lingo Primus-iAN-02ex router username and password, use our How to Reset a Router Password guide to set your Lingo Primus-iAN-02ex router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Lingo Primus-iAN-02ex router to save you time and hassle.
Now that you are logged in to your Lingo Primus-iAN-02ex router you should see the following:
Click the Port Forwarding link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Darksiders Wrath of War requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.
|Forward port: |
(Forward port: 21 for ftp, 23 for telnet, 80 for web server.)
|To private IP: 172.25.25.|
Click the Save Configuration link near the left of the page.
Click the Save button.
Click the Reboot link near the left of the page.
Click the Reboot button.
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Darksiders Wrath of War on the Lingo Primus-iAN-02ex you should test to see if your ports are forwarded correctly.