Free Help Setting up Your Router or Firewall Set up your router from home
Router List Port List Port Checker Other Guides Game Guides Store Support Forum
see list of routers and firewalls below

Port Forwarding AppNameTag on the Linksys WAG54GS


What is Port Forwarding?
What is Port Triggering?


 

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Please enter the static ip you want to forward to:

192.168.1.




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is admin. Click the Ok button to log in to your router.




Click the Applications & Gaming link near the top of the page.

You should now see a new menu. In this new menu, click Single Port Forwarding or Port Range Forwarding.






Forwarding a Port Range
Enter the name of the program into the Application box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea. If you are forwarding a single port, enter that port number into the Port Range Start and the Port Range End boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Port Range Start box. Then enter the highest number of that range into the Port Range End box. Use the TCP UDP drop down box to select the protocol type of the ports you are forwarding. Enter the ip address to forward these ports to into the IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Put a checkmark in the Enabled checkbox.




Forwarding a Single Port
Enter the name of the program into the Application box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea. Enter the port to forward into the External Port and the Internal Port boxes. Use the Protocol drop down box to select the protocol type of the ports you are forwarding. Enter the ip address to forward these ports to into the IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Put a checkmark in the Enabled checkbox.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!



To test if your port has been properly forwarded, you can use our Port Checker tool.