To setup port forwarding on the Linksys WRT54G router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Linksys WRT54G router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Linksys WRT54G router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Linksys WRT54G router.
Please visit our Default Linksys Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Linksys WRT54G router username and password, use our How to Reset a Router Password guide to set your Linksys WRT54G router back to its factory settings.
Before we can forward ports for Warez, we need to figure out what ports Warez is using. Here is a brief walkthrough on how to do that. Go ahead and open up Warez.
Click Main in the menu at the top of your screen. In the list that drops down click Preferences.
On the left side of this page click on Network. Now we need to what port is in use
for Warez under the option "Listen port". It doesn't really matter what port you choose, but a port between
9000 and 60000 would be a good idea. These higher numbered ports are rarely blocked by ISPs.
Once you have chosen a port (9000 is the default for Warez) please enter that port number into
the box to the right of the Network settings box. That port should also be put into the Listen port box.
I also need to you enter that port number into the box below.
Now that you are logged in to your Linksys WRT54G router you should see the following:
Click the Security link near the top of the page.
Remove the checkmark from the Block Anonymous Internet Requests checkbox.
Click the Save Settings button near the bottom of the page.
Click the Applications & Gaming link near the top of the page.
You should now see a new menu. In this new menu, click Port Range Forward.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Warez requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Range Forward menu.
When you're finished, click Save Settings near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Warez on the Linksys WRT54G you should test to see if your ports are forwarded correctly.