Port Forwarding World of Warcraft Downloader on the Linksys WRT54G

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Linksys > WRT54G > World of Warcraft Downloader

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

192.168.1.
WRT54G

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.

WRT54G

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is admin. Click the Ok button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above did not work for you.

WRT54G

Click the Security link near the top of the page.

WRT54G

Remove the checkmark from the Block Anonymous Internet Requests checkbox.

Click the Save Settings button near the bottom of the page.

Click the Applications & Gaming link near the top of the page.

You should now see a new menu. In this new menu, click Port Range Forward.

WRT54G



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. World of Warcraft Downloader requires you to forward the following ports: 1119-1120,3724,4000,6112-6114,6881-6999. Go ahead and enter the settings shown above into the Port Range Forward menu.

Port Range
Application Start End Protocol IP Address Enable
To 192.168.1.




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Range Forward page. Go ahead and enter those settings now.

Port Range
Application Start End Protocol IP Address Enable
To 192.168.1.




Entry #3

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Range Forward page. Go ahead and enter those settings now.

Port Range
Application Start End Protocol IP Address Enable
To 192.168.1.




Entry #4

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Range Forward page. Go ahead and enter those settings now.

Port Range
Application Start End Protocol IP Address Enable
To 192.168.1.




Entry #5

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Range Forward page. Go ahead and enter those settings now.

Port Range
Application Start End Protocol IP Address Enable
To 192.168.1.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.