To setup port forwarding on the MacSense MIH-130A router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your MacSense MIH-130A router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your MacSense MIH-130A router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your MacSense MIH-130A router.
Please visit our Default MacSense Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your MacSense MIH-130A router username and password, use our How to Reset a Router Password guide to set your MacSense MIH-130A router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your MacSense MIH-130A router to save you time and hassle.
Now that you are logged in to your MacSense MIH-130A router you should see the following:
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 NCAA Basketball 09 requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Server menu.
|Protocol||Ports||Redirect IP Address|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 NCAA Basketball 09 on the MacSense MIH-130A you should test to see if your ports are forwarded correctly.