To setup port forwarding on the MaxGate UGate3200 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your MaxGate UGate3200 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your MaxGate UGate3200 router. By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your MaxGate UGate3200 router.
Please visit our Default MaxGate Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your MaxGate UGate3200 router username and password, use our How to Reset a Router Password guide to set your MaxGate UGate3200 router back to its factory settings.
Now that you are logged in to your MaxGate UGate3200 router you should see the following:
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 NBA Ballers Chosen One requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Server menu.
|service Port No.||LAN IP Address|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 NBA Ballers Chosen One on the MaxGate UGate3200 you should test to see if your ports are forwarded correctly.