Port Forwarding the Mentor FR411UK Router for TeamSpeak 3 Server


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Mentor > FR411UK > TeamSpeak 3 Server

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Mentor FR411UK router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.1. <-- Don't Skip This Step!

Login to the Mentor FR411UK Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Mentor FR411UK Router IP Address

It's ok if you don't know your Mentor FR411UK router's internal IP address. You can find it by doing one of the following:

Login To The Mentor FR411UK Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Mentor FR411UK Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Mentor FR411UK router. By default the IP address should be set to 192.168.1.1.

Mentor FR411UK Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Mentor FR411UK Router Username is: blank

The Default Mentor FR411UK Router Password is: blank


Click the Ok button to log in to your Mentor FR411UK router.


Default Usernames and Passwords for other Mentor Routers

Please visit our Default Mentor Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Mentor FR411UK router username and password, use our How to Reset a Router Password guide to set your Mentor FR411UK router back to its factory settings.


How to Port Forward TeamSpeak 3 Server on the Mentor FR411UK


Having trouble forwarding ports on the Mentor FR411UK?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Mentor FR411UK router to save you time and hassle.

Mentor FR411UK Router Port Forwarding Screenshots

Now that you are logged in to your Mentor FR411UK router you should see the following:

Mentor FR411UK Screenshot 2

Click the Advanced Setup link near the center of the page.

Mentor FR411UK Screenshot 3

Click the NAT link near the left of the page.

Mentor FR411UK Screenshot 4

Click the Virtual Server link near the left of the page.

Mentor FR411UK Screenshot 5

Forward Ports 9987,10011,30033 on the Mentor FR411UK

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. TeamSpeak 3 Server requires you to forward the following ports: 9987,10011,30033. Go ahead and enter the settings shown above into the Virtual Server menu.

 Mapping PortsServer IPEnabled
1.192.168.1.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for TeamSpeak 3 Server on the Mentor FR411UK you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Mentor FR411UK Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.