To setup port forwarding on the Micronet SP916GK router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Micronet SP916GK router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Micronet SP916GK router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Micronet SP916GK router.
Please visit our Default Micronet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Micronet SP916GK router username and password, use our How to Reset a Router Password guide to set your Micronet SP916GK router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Micronet SP916GK router to save you time and hassle.
Now that you are logged in to your Micronet SP916GK router you should see the following:
Click the General Setup button near the left of the page.
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server or Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Secret Service requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Virtual Server or Port Forwarding menu and then click Add.
|Private IP||Private Port||Type||Public Port||Comment|
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Secret Service on the Micronet SP916GK you should test to see if your ports are forwarded correctly.