Port Forwarding the Microsoft MN-100 Router for F-16 Multirole Fighter

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Microsoft Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Microsoft > MN-100 > F-16 Multirole Fighter

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Microsoft MN-100 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.2. <-- Don't Skip This Step!

Login to the Microsoft MN-100 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Microsoft MN-100 Router IP Address

It's ok if you don't know your Microsoft MN-100 router's internal IP address. You can find it by doing one of the following:

Login To The Microsoft MN-100 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Microsoft MN-100 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Microsoft MN-100 router. By default the IP address should be set to

Microsoft MN-100 Screenshot 1

You should see a box prompting you for your Microsoft MN-100 password. Enter the password now.

The Default Microsoft MN-100 Router Password is: admin

Click the Log On button to log in to your Microsoft MN-100 router.

Default Usernames and Passwords for other Microsoft Routers

Please visit our Default Microsoft Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Microsoft MN-100 router password, use our How to Reset a Router Password guide to set your Microsoft MN-100 router back to its factory settings.

How to Port Forward F-16 Multirole Fighter on the Microsoft MN-100

Having trouble forwarding ports on the Microsoft MN-100?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Microsoft MN-100 Router Port Forwarding Screenshots

Now that you are logged in to your Microsoft MN-100 router you should see the following:

Microsoft MN-100 Screenshot 2

Click the Security link near the left of the page.

Microsoft MN-100 Screenshot 3

Click the Port Forwarding link near the center of the page.

Microsoft MN-100 Screenshot 4

Click the Set up persistent port forwarding link near the center of the page.

Microsoft MN-100 Screenshot 5

Forward Ports 3862-3863 on the Microsoft MN-100

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. F-16 Multirole Fighter requires you to forward the following ports: 3862-3863. Go ahead and enter the settings shown above into the Persistent Port Forwarding menu.

Enable Description Inbound port Type Private IP address Private port

- 192.168.2. -

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for F-16 Multirole Fighter on the Microsoft MN-100 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Microsoft MN-100 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Microsoft Router Screenshots. We have the Internets largest collection of Router Screenshots.