Free Help Setting up Your Router or Firewall Set up your router from home
Router List Port List Port Checker Other Guides Game Guides Store Support Forum
see list of routers and firewalls below

Port Forwarding XBOX360 Battlefield Bad Company on the Motorola SBG 900


What is Port Forwarding?
What is Port Triggering?


To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Please enter the static ip you want to forward to:

192.168.100.




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.100.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is motorola. Click the Log In button to log in to your router.

Please visit our default username and passsword page, if the username and password shown above did not work for you.




Click the Gateway button near the left of the page.

The menu near the top should change. In this new menu, click Port Forwarding.


Click the config button near the top of the page.




We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Battlefield Bad Company requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Add New Port Forwarding Entry menu and then click Add.

Template
Name
Port Start
Port End
LAN IP Address 192.168.0.
Enable

You should see another page of settings that need to be entered into one of the blank lines on your routers Add New Port Forwarding Entry page. Go ahead and enter those settings and then click Add.

Template
Name
Port Start
Port End
LAN IP Address 192.168.0.
Enable

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!



To test if your port has been properly forwarded, you can use our Port Checker tool.