Port Forwarding the Motorola WR850Gv6.1.4 Router for GeoVision DMIP

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Motorola Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Motorola > WR850Gv6.1.4 > GeoVision DMIP

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Motorola WR850Gv6.1.4 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Motorola WR850Gv6.1.4 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Motorola WR850Gv6.1.4 Router IP Address

It's ok if you don't know your Motorola WR850Gv6.1.4 router's internal IP address. You can find it by doing one of the following:

Login To The Motorola WR850Gv6.1.4 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Motorola WR850Gv6.1.4 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Motorola WR850Gv6.1.4 router. By default the IP address should be set to

Motorola WR850Gv6.1.4 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Motorola WR850Gv6.1.4 Router Username is: admin

The Default Motorola WR850Gv6.1.4 Router Password is: motorola

Click the Ok button to log in to your Motorola WR850Gv6.1.4 router.

Default Usernames and Passwords for other Motorola Routers

Please visit our Default Motorola Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Motorola WR850Gv6.1.4 router username and password, use our How to Reset a Router Password guide to set your Motorola WR850Gv6.1.4 router back to its factory settings.

How to Port Forward GeoVision DMIP on the Motorola WR850Gv6.1.4

Having trouble forwarding ports on the Motorola WR850Gv6.1.4?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Motorola WR850Gv6.1.4 Router Port Forwarding Screenshots

Now that you are logged in to your Motorola WR850Gv6.1.4 router you should see the following:

Motorola WR850Gv6.1.4 Screenshot 2

Click the Routing button near the top of the page.

Motorola WR850Gv6.1.4 Screenshot 3

Forward Ports 21 on the Motorola WR850Gv6.1.4

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GeoVision DMIP requires you to forward the following ports: 21. Go ahead and enter the settings shown above into the Routing menu.

Protocol WAN Port Start WAN Port End LAN IP Address LAN Port Start LAN Port End Enabled

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for GeoVision DMIP on the Motorola WR850Gv6.1.4 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Motorola WR850Gv6.1.4 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Motorola Router Screenshots. We have the Internets largest collection of Router Screenshots.