Port Forwarding the Net-Lynx NetLynx-Vulcan Router for QSee QR424-411-3


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Net-Lynx Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Net-Lynx > NetLynx-Vulcan > QSee QR424-411-3

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Net-Lynx NetLynx-Vulcan router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.1. <-- Don't Skip This Step!

Login to the Net-Lynx NetLynx-Vulcan Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Net-Lynx NetLynx-Vulcan Router IP Address

It's ok if you don't know your Net-Lynx NetLynx-Vulcan router's internal IP address. You can find it by doing one of the following:

Login To The Net-Lynx NetLynx-Vulcan Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Net-Lynx NetLynx-Vulcan Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Net-Lynx NetLynx-Vulcan router. By default the IP address should be set to 192.168.1.1.

Net-Lynx NetLynx-Vulcan Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Net-Lynx NetLynx-Vulcan Router Username is: root

The Default Net-Lynx NetLynx-Vulcan Router Password is: root


Click the Ok button to log in to your Net-Lynx NetLynx-Vulcan router.


Default Usernames and Passwords for other Net-Lynx Routers

Please visit our Default Net-Lynx Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Net-Lynx NetLynx-Vulcan router username and password, use our How to Reset a Router Password guide to set your Net-Lynx NetLynx-Vulcan router back to its factory settings.


How to Port Forward QSee QR424-411-3 on the Net-Lynx NetLynx-Vulcan


Having trouble forwarding ports on the Net-Lynx NetLynx-Vulcan?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Net-Lynx NetLynx-Vulcan router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Net-Lynx NetLynx-Vulcan Router Port Forwarding Screenshots

Now that you are logged in to your Net-Lynx NetLynx-Vulcan router you should see the following:

Net-Lynx NetLynx-Vulcan Screenshot 2

Click the Services button near the top of the page.

Net-Lynx NetLynx-Vulcan Screenshot 3

Select NAT Rule Entry from the NAT Options drop down box.

Net-Lynx NetLynx-Vulcan Screenshot 4

Click the Add button near the bottom of the page.

Net-Lynx NetLynx-Vulcan Screenshot 5

Forward Ports 80 on the Net-Lynx NetLynx-Vulcan

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR424-411-3 requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        


Forward Ports 9000 on the Net-Lynx NetLynx-Vulcan

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Rule - Add page. Go ahead and enter those settings and then click Submit.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        
Net-Lynx NetLynx-Vulcan Screenshot 6

Click the Close button near the bottom of the page.

Click the IP Filter link near the top of the page.

Net-Lynx NetLynx-Vulcan Screenshot 7

Select Low from the Security Level drop down box.

Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.

Click the Submit button near the bottom of the page.

Click the Admin button near the top of the page.

You should now see a new menu. In this new menu, click Commit & Reboot.

Net-Lynx NetLynx-Vulcan Screenshot 8

Click the Commit button near the bottom of the page.

Click the Reboot button near the bottom of the page.

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QR424-411-3 on the Net-Lynx NetLynx-Vulcan you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Net-Lynx NetLynx-Vulcan Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Net-Lynx Router Screenshots. We have the Internets largest collection of Router Screenshots.