To setup port forwarding on the Net-Lynx WAR25TC router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Net-Lynx WAR25TC router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Net-Lynx WAR25TC router. By default the IP address should be set to 10.0.0.2.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Net-Lynx WAR25TC router.
Please visit our Default Net-Lynx Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Net-Lynx WAR25TC router username and password, use our How to Reset a Router Password guide to set your Net-Lynx WAR25TC router back to its factory settings.
Now that you are logged in to your Net-Lynx WAR25TC router you should see the following:
Click the Advanced Setup button near the top of the page.
Click the NAT button near the top of the page.
Click the Virtual Server link near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Don King Presents Prizefighter requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.
|Rule Index :|
|Start Port Number :|
|End Port Number :|
|Local IP Address :|
And that is it! You are done!
Now that you have forwarded ports for XBOX360 Don King Presents Prizefighter on the Net-Lynx WAR25TC you should test to see if your ports are forwarded correctly.