To setup port forwarding on the Net-Lynx WR514R router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Net-Lynx WR514R router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Net-Lynx WR514R router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Net-Lynx WR514R router.
Please visit our Default Net-Lynx Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Net-Lynx WR514R router username and password, use our How to Reset a Router Password guide to set your Net-Lynx WR514R router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Net-Lynx WR514R router to save you time and hassle.
Now that you are logged in to your Net-Lynx WR514R router you should see the following:
Click the Firewall link near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GunZ requires you to forward the 7700-7800 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Apply Changes.
|Enable Port Forwarding|
|IP Address:||Protocol:||Port Range: -||Comment:|
And that is it! You are done!
Now that you have forwarded ports for GunZ on the Net-Lynx WR514R you should test to see if your ports are forwarded correctly.