Port Forwarding the Net-Lynx WR514R Router for KDX Server

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Net-Lynx Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Net-Lynx > WR514R > KDX Server

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Net-Lynx WR514R router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Net-Lynx WR514R Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Net-Lynx WR514R Router IP Address

It's ok if you don't know your Net-Lynx WR514R router's internal IP address. You can find it by doing one of the following:

Login To The Net-Lynx WR514R Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Net-Lynx WR514R Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Net-Lynx WR514R router. By default the IP address should be set to

Net-Lynx WR514R Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Net-Lynx WR514R Router Username is: admin

The Default Net-Lynx WR514R Router Password is: 1234

Click the Ok button to log in to your Net-Lynx WR514R router.

Default Usernames and Passwords for other Net-Lynx Routers

Please visit our Default Net-Lynx Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Net-Lynx WR514R router username and password, use our How to Reset a Router Password guide to set your Net-Lynx WR514R router back to its factory settings.

How to Port Forward KDX Server on the Net-Lynx WR514R

Having trouble forwarding ports on the Net-Lynx WR514R?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Net-Lynx WR514R router to save you time and hassle.

Net-Lynx WR514R Router Port Forwarding Screenshots

Now that you are logged in to your Net-Lynx WR514R router you should see the following:

Net-Lynx WR514R Screenshot 2

Click the Firewall link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Net-Lynx WR514R Screenshot 3

Forward Ports 10700 on the Net-Lynx WR514R

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. KDX Server requires you to forward the 10700 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Apply Changes.

Enable Port Forwarding
IP Address: Protocol: Port Range: - Comment:

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for KDX Server on the Net-Lynx WR514R you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Net-Lynx WR514R Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Net-Lynx Router Screenshots. We have the Internets largest collection of Router Screenshots.