Login To The NetMaster CBW-560 Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your NetMaster CBW-560 router.
By default the IP address should be set to 192.168.0.1.
We do not currently know the default username and password for your router. If you know them, please use our
Comments page to let us know what they are. Thanks!
How to Port Forward Qsee QSTD2416C16-320 on the NetMaster CBW-560
Having trouble forwarding ports on the NetMaster CBW-560?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Configuring the DVR to pick up an IP address
Put a check in the DHCP box.
Exit out to the live cameras by pressing the ESC button on the DVR.
Power Cycle the DVR
Remove the power cable from the back of the dvr.
Wait 20 seconds.
Plug in the power cable.
Identifying the IP address
Write down the IP address, subnet mask & gateway found on your info network screen.
Assign a Static IP
Remove the check from the DHCP box.
Input the same IP address, subnet mask & gateway - (you wrote down earlier).
NetMaster CBW-560 Router Port Forwarding Screenshots
Now that you are logged in to your NetMaster CBW-560 router you should see the following:
Click the Advanced link near the top of the page.
The menu on the left should change. In this new menu, click Forwarding.
Forward Ports 80 on the NetMaster CBW-560
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSTD2416C16-320 requires
you to forward the following ports: 80,2000. Go ahead and enter the settings shown above into the Forwarding menu.
Local IP Adr
Forward Ports 2000 on the NetMaster CBW-560
You should see another page of settings that need to be entered into one of the blank lines on your routers Forwarding page.
Go ahead and enter those settings now.
Local IP Adr
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Test if Your Ports are Open
Now that you have forwarded ports for Qsee QSTD2416C16-320 on the NetMaster CBW-560 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.