Port Forwarding the Netcomm MyZone-3G24W Router for QSee QSPDVR04

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netcomm Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Netcomm > MyZone-3G24W > QSee QSPDVR04

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netcomm MyZone-3G24W router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.10. <-- Don't Skip This Step!

Login to the Netcomm MyZone-3G24W Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netcomm MyZone-3G24W Router IP Address

It's ok if you don't know your Netcomm MyZone-3G24W router's internal IP address. You can find it by doing one of the following:

Login To The Netcomm MyZone-3G24W Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Netcomm MyZone-3G24W Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netcomm MyZone-3G24W router. By default the IP address should be set to

Netcomm MyZone-3G24W Screenshot 1

Click the Switch to Advanced View link near the bottom of the page.

Netcomm MyZone-3G24W Screenshot 2

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netcomm MyZone-3G24W Router Username is: admin

The Default Netcomm MyZone-3G24W Router Password is: admin

Click the Submit button to log in to your Netcomm MyZone-3G24W router.

Default Usernames and Passwords for other Netcomm Routers

Please visit our Default Netcomm Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netcomm MyZone-3G24W router username and password, use our How to Reset a Router Password guide to set your Netcomm MyZone-3G24W router back to its factory settings.

How to Port Forward QSee QSPDVR04 on the Netcomm MyZone-3G24W

Having trouble forwarding ports on the Netcomm MyZone-3G24W?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR.

Open the SuperDvr program. Click the lock on the right side of the window to log in. By default the username is system and the password is blank. That might mean that you enter nothing for the password, or you might actually have to type blank.

Click the wrench tool on the right hand side of the screen to get in to the configuration menu.

The red box in the screenshot above circles the ports that must be forwarded to your computer's ip address.

Netcomm MyZone-3G24W Router Port Forwarding Screenshots

Now that you are logged in to your Netcomm MyZone-3G24W router you should see the following:

Netcomm MyZone-3G24W Screenshot 3

Click the Service link near the top of the page.

You should now see a new menu. In this new menu, click Routing.

You should now see a new menu. In this new menu, click NAT.

Netcomm MyZone-3G24W Screenshot 4

Forward Ports 80 on the Netcomm MyZone-3G24W

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSPDVR04 requires you to forward the 80,1159-1161 ports. Go ahead and enter the settings shown above into the NAT Settings menu and then click Save NAT.

Mapping no
Source IP Address ...
Incoming Port Range to
Destination IP Address ...
Destination Port Range to

Forward Ports 1159-1161 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Source IP Address ...
Incoming Port Range to
Destination IP Address ...
Destination Port Range to

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSPDVR04 on the Netcomm MyZone-3G24W you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netcomm MyZone-3G24W Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netcomm Router Screenshots. We have the Internets largest collection of Router Screenshots.