Port Forwarding the Netcomm MyZone-3G24W Router for Synology DS411j

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Netcomm Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Netcomm MyZone-3G24W router your computer needs to have a static IP address. You should complete one of the following steps first:

• Either try our free program that will setup a static IP address for you called PF Setup Static IP.
• Or follow our Static IP Address guide to setup a static IP address.

Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Login to the Netcomm MyZone-3G24W Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Netcomm MyZone-3G24W Router IP Address

It's ok if you don't know your Netcomm MyZone-3G24W router's internal IP address. You can find it by doing one of the following:

• Either find your router IP address using this guide: How To Find Your Routers IP Address
• Or you can use our Free Software to find your router IP address. PF Static IP Address and PF Router Detector are both free software applications that will help you find your router IP address.

Login To The Netcomm MyZone-3G24W Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Netcomm MyZone-3G24W router. By default the IP address should be set to 192.168.10.50.

Click the Switch to Advanced View link near the bottom of the page.

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Netcomm MyZone-3G24W Router Username is: admin

The Default Netcomm MyZone-3G24W Router Password is: admin

Click the Submit button to log in to your Netcomm MyZone-3G24W router.

Default Usernames and Passwords for other Netcomm Routers

Please visit our Default Netcomm Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Netcomm MyZone-3G24W router username and password, use our How to Reset a Router Password guide to set your Netcomm MyZone-3G24W router back to its factory settings.

How to Port Forward Synology DS411j on the Netcomm MyZone-3G24W

Having trouble forwarding ports on the Netcomm MyZone-3G24W?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Netcomm MyZone-3G24W router to save you time and hassle.

Netcomm MyZone-3G24W Router Port Forwarding Screenshots

Now that you are logged in to your Netcomm MyZone-3G24W router you should see the following:

Click the Service link near the top of the page.

You should now see a new menu. In this new menu, click Routing.

You should now see a new menu. In this new menu, click NAT.

Forward Ports 20-22 on the Netcomm MyZone-3G24W

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Synology DS411j requires you to forward the 20-22,25,80,110-111,137-139,143,443,445,548,873,892,993,995,2049,3260,4662,4672,5000-5001,5005-5006,5432,6881-6999,7000-7001,9997-9999,55536-55663,55736-55863 ports. Go ahead and enter the settings shown above into the NAT Settings menu and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 25 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 80 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 110-111 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 137-139 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 143 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 443 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 445 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 548 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 873 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 892 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 993 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 995 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 2049 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 3260 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 4662 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 4672 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 5000-5001 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 5005-5006 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Port 5432 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 6881-6999 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 7000-7001 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 9997-9999 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 55536-55663 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

Forward Ports 55736-55863 on the Netcomm MyZone-3G24W

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Settings page. Go ahead and enter those settings and then click Save NAT.

Mapping no
Protocol	all
Source IP Address	...
Incoming Port Range	to
Destination IP Address	...
Destination Port Range	to

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Synology DS411j on the Netcomm MyZone-3G24W you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netcomm MyZone-3G24W Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Netcomm Router Screenshots. We have the Internets largest collection of Router Screenshots.